The latest version of Abgx360which adds support for patching AP25 topology data and verifying XGD3 ISOs/backups has just been released.
From the NFO:
Changes affecting all platforms:
- XGD3 support
.
- Replaced AP25 replay sector support with support for topology data (for consoles which do AP25 checks -- make sure you have LT+ v3.0 or later).
- Added "Min Kernel Required" (to boot the game) when checking an XEX.
- Added improvements to AutoUpload (used by uploaders) including extended C/R for SS (using the original disc) to make sure files uploaded to the database have very accurate angle measurements.
- Added optional command line argument "--speed" for setting drive speed when checking a burned DVD. Example: "--speed 12" will attempt to set the drive speed to 12x. You can try to set any speed you like, but setting a speed higher than what your media supports may cause read errors if the drive's firmware doesn't govern it. "--speed 0" will set the drive's default speed.
- Added optional command line argument "--showsstable" for when you want to see the SS C/R data but you still prefer medium or low verbosity. The SS C/R table has also been updated with "Mod?" being split into "Tol" (response tolerance) for the CCRT entry and "Mod" (response modifier) for the drive entry, also "Pad?" has been renamed to "Typ" (type). Thanks Redline99!
- Added vendor specific additional info and bus type when displaying optical drive names (bus type displayed on Windows only).
- Updated the list of optical drive sense code errors.
- Updated the game ratings definitions.
- Fixed a bug which negated the ability to recover from a write error when rebuilding an ISO using the low disk space method. It's unlikely that a write error would be recovered on subsequent retries, but at least now it will write the data in the correct place if it does recover.
- Fixed a bug which caused "Unknown Media: 0x00000000" to be displayed if the "Secure Virtual Optical Device" media flag was set and the "XGD2 Media Only" image flag was not set (The "XGD2 Media Only" flag has also been renamed to "Original Media Only" in abgx360 since they are using the same flag for XGD3).
- The archaic caution message about angle 359 was removed, but you are still able to "fix" it if you still have iXtreme < v1.4 (really old and not suitable for XBL anyway).
- Ability to "extract entire video partition (253 MB)" was removed; this doesn't make sense for XGD3 and isn't even very useful for XGD2 since it was just including a bunch of padding data that isn't even part of the real video partition... it was only needed for very old methods of concatenating with stealth files and a game partition to make a working backup.
C4eva today confirmed that iXtreme LT+ v3.0 is on the way!
Yesterday, having revealed to the team an idea for countering the recent dae.bin/AP2.5 update, c4eva has today confirmed that he has in fact completely done away with the need for dae.bin/AP2.5 data.
Although it’s early stages, c4eva has successfully completed several tests which validate this new method and classified his solution as the “silver bullet” for AP2.5. Rather than using captured challenge results each time the dae.bin changes, the new method builds a complete set of profile data for each disc and works for all AP2.5 challenges, regardless of how the dae.bin is changed.
As a result, the format of backup ISOs will be changing as the AP25 replay sector will no longer be included and the profile data will instead take its place. Though c4eva noted that it will take some development time as it’s not a quick fix, both he and the team will now be putting their full efforts behind bringing this solution to life in the form of new versions of iXtreme LT+, Xbox Backup Creator, and abgx360.
With all the recent bannings comes a new version of the ever popular ISO checking tool ABGX360.
abgx360 v1.0.2 released!
Changes affecting all platforms:
- Added support for 4th Wave PFI/Video
- Added support for SS v2
- Added the new check for DMI corruption which the database has been using since 2009/06/14
- Added ability to at least try to verify the game data when no Xex/SS ini is available and we're not going to AutoFix
- Added support for Avatar Awards
- Added option to select your preferred language to use when displaying strings from the Xex title resource
- Added drag & drop support for the GUI Input panel
- Added option to embed images in the HTML source code as data URIs for better portability (when using HTML output)
- Added JavaScript to HTML output that allows you to check off achievements and see the achieved text (especially useful when the how-to text is vague)
- Added a Donate button to the GUI so you can help me pay the bills and continue working on improvements :)
- Removed "Look for verified files in the local folder only" option from the GUI. I can't tell you how many people have checked this box without reading it because they saw it in a tutorial or someone else told them to do it, and then they can't figure out why abgx360 says you need to enable online functions. Please stop writing/following tutorials! Just read the Quickstart topics, the tutorial is right there.
- Checking for updates to GameNameLookup.csv is now optional (the csv was eating 50% of our bandwidth and you probably don't need it anyway since the game name can be retrieved directly from the Xex)
- Fixed a bug where folders would be considered files when parsing the ISO filesystem on some recent games
- Fixed a bug where default.pe (a temporary file used when decompressing a compressed default.xex) wasn't being deleted automatically
- Fixed a bug where unicode code point 160 (no-break space) would be displayed in a CLI window as " ?" instead of " "
- Small changes to the way some messages are displayed (harder to miss)
Changes affecting Windows:
- Now storing data files in the AppData folder to prevent errors related to permissions and UAC. You can open the GUI and hit Ctrl+F to find out where your StealthFiles are now stored and optionally have it opened for you. abgx360 will still check for Video ISOs in the old install directory first though, so you don't need to move that 3rd Wave Video ISO if you have it saved there already.
- Using libcurl 7.19.6 which should hopefully fix some strange connection problems affecting a small percentage of users
Changes affecting Linux/BSD:
- Fixed a bug on 64 bit systems which made it impossible to read PFI/Video exceptions from abgx360.dat
- Added code to the unix version of kbhit() to prevent hanging when abgx360 is launched as a background process
Changes affecting Mac OS X:
- Fixed a bug where abgx360 would fail to launch if you supplied a filename that contained an apostrophe
- Changed the dark gray text used for things like achievement type to normal gray since it was actually showing up black (invisible on a black background)
- Removed GUI option to "Use Terminal font characters" (this refers to a Windows font which replicates CP437 characters and not Terminal.app)
Special Note: It's recommended to wait for iXtreme LT (Lite Touch) before you play any more backups or originals on an unbanned console flashed with custom firmware.
Kushan on ABGX360.net has posted more details about "Wave 4" and abgx360. abgx360 v1.0.2 will be released with full Wave 4 recognition in a similar manner to the new iXtreme; that is once the transition date is known and any exceptions are noted.
What IS "Wave 4"?
A regular, retail Xbox 360 disk is split into several sections or "partitions". One of these partitions is known as the "video partition". Before March 2009, this partition simply contained a video that would play if you inserted the disk into a regular DVD player, the video would basically tell you that you were an idiot and need to put it into an Xbox 360 to play it.
If you are on the HQ Homepage be sure to click the link to view the entire story..
HQ Network: 8,586 | 
Guests: 4521 |
Members: 0
